Electrolux EDH803P5WC Dryer Manual

The Electrolux EDH803P5WC is a high-efficiency condenser dryer designed to provide optimal drying performance while being gentle on your clothes. It features various drying programs, a large capacity drum, and advanced technology to ensure your laundry is dried effectively and efficiently. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Power 7. Operating the Dryer 8. Maintenance and Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Large capacity drum, multiple drying programs, energy-efficient operation, user-friendly interface, and advanced moisture sensing technology.

Feature	Description
Condenser drying technology	Efficient drying without the need for external venting
Moisture sensor	Automatically adjusts drying time based on moisture levels
Multiple drying programs	Variety of settings for different fabric types
Delay start option	Allows you to set a delayed start time for convenience
Child lock	Prevents accidental operation by children
Energy efficiency	Designed to minimize energy consumption

Installation

Unpack and inspect contents. Place the dryer on a stable surface.

Ensure proper ventilation: Follow local codes for venting if applicable.
Connect power supply: Use a dedicated outlet for optimal performance.
Level the dryer: Adjust the feet to ensure the dryer is stable.
Plug into AC power.

WARNING! Dryer is heavy; lift with care to avoid injury. Ensure all connections are secure.

First-Time Setup

Power on the dryer; follow on-screen prompts to set preferences.

Select language: Choose your preferred language from the settings menu.
Set drying preferences: Adjust settings for optimal drying based on fabric type.
Run a test cycle: Ensure the dryer operates correctly before regular use.

CAUTION! Ensure stable surface; use two people for handling if necessary.

Specifications

Dryer Type: Condenser dryer.
Capacity: 8 kg.
Energy Rating: A++.
Dimensions: 85 cm x 60 cm x 60 cm.
Weight: 50 kg.
Power Supply: 230V, 50Hz.
Noise Level: 65 dB.
Programs: Cotton, Synthetics, Delicates, Wool, and more.

Controls and Settings

Access settings via the digital display. Control panel includes: Start/Pause, Program selection, Temperature settings, and Delay start.

Additional Features: Child lock, End of cycle signal, and Time remaining display.

Connecting Power

Ensure the dryer is connected to a suitable power outlet.

Turn off the power supply before connecting.
Use the appropriate power cord as specified in the manual.
Ensure the outlet is grounded for safety.

Tip: Check the power supply voltage before connecting the dryer.

Operating the Dryer

Follow these steps to operate the dryer:

Load laundry: Do not overload the drum for optimal drying.
Select drying program: Choose the appropriate setting based on fabric type.
Start the cycle: Press the Start button to begin drying.
Monitor progress: Check the display for time remaining and cycle status.

WARNING! Do not open the door during operation; wait for the cycle to complete.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the lint filter after every use.
Check the condenser unit regularly for blockages.
Wipe the exterior with a damp cloth to keep it clean.

CAUTION! Unplug the dryer before performing maintenance.

Regulatory Information

This dryer complies with all applicable safety standards and regulations. For more information, visit the Electrolux website or contact customer support.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Dryer not starting	Power supply issue	Check power connection and outlet.
No heat	Blocked vent or filter	Clean lint filter and check venting.
Long drying time	Overloading or incorrect settings	Reduce load size and check settings.
Unusual noise	Foreign object in drum	Check drum for any objects and remove.
Door not closing	Obstruction or misalignment	Check for obstructions and realign door.

Reset: Refer to the manual for reset instructions if necessary.

Service: For support, contact Electrolux customer service.